Emailcontact

CK61125 Heavy duty CNC lathe machine, Max. loading capacity 16 tons, Guideway width 1100mm


Introduction:

1. It is very suitable to machine shaft parts of gas turbines, rotor, rollers and other large high-precision;
2. Bed, slide , and headstock are made of resin sand casting with good stability,high strength and other features. passing two aging treatment to eliminate stress and ensure the stability of precision under the machine long-term be used.
3. Using Soldworks and Ansys do optimizing design to improve rigidity and stability of large parts and complete machine, effectively inhibited the cutting forces cause deformation and vibration of the machine.
4.Centralized lubrication system in headstock for less heating and heat distortion. And front end of the spindle adopts three-supporting structure of two-way angular in touch with the ball bearing to improve its accuracy and enhance its rigidity.
5.The control system can be selected according to the needs of users.


Technical Parameters:


Item Unit CK61125 CK61160 CK61200
Processing range
Swing over bed mm 1250 1640 2000
Swing over carriage mm 900 1250 1600
Max.length of workpiece mm 3000;5000;6000;8000 3000;5000;6000;8000 3000;5000;6000;8000
Max. turning length mm 2800;4800;5800;4800 2800;4800;5800;4800 2800;4800;5800;4800
Max. loading capacity Ton 16 16 16
Guideway width mm 1100 1100 1100
Spindle
Spindle nose mm A2-15 A2-15 A2-15
Spindle bore mm 100 100 100
Taper hole of spindle mm 140 140 140
Range of spindle speeds rpm 3-320 3-320 3-320
No.of spindle speeds   stepless stepless stepless
Chuck mm 1250 1400 1600
Feed
Max.cutting power N 39200 39200 39200
Rapid speeds mm/min 4000/6000 4000/6000 4000/6000
Max. travel of X mm 850 850 850
Turret
Turret working position   V4 V4 V4
Size of turret mm 380*380 380*380 380*380
Max. feed force N 10875 10875 10875
Section of tool shank mm 50*50 50*50 50*50
Tailstock
Diameter of tailstock quill mm 260 260 260
Travel of tailstock quill mm 300 300 300
Taper hole of tailstock   Metric 80 Metric 80 Metric 80
Others
Workpiece accuracy   IT7 IT7 IT7
Surface roughness μm Ra 2.5-3.2 Ra 2.5-3.2 Ra 2.5-3.2
Main power mm 30 30 30
Length mm 6400;8400;9400;11400 6400;8400;9400;11400 6400;8400;9400;11400
Width mm  3200 3200 3200
Height mm 2220 2750 2950
CNC systerm                                                                                 FANUC OI MATE / GSK / SIEMENS

Email Us(*)Required information

product list
Used Equipment
 
gallery